 This article is about a/an transformation device in Kamen Rider Saber.
|
- "Holy Saber Volt!"
- ―Emblem scanned announcement[src]
The Holy Saber Volt is the transformation device and personal Holy Saber of Kamen Rider Volt. After Volt was sealed into the Demon Saber Shadow, it was in the possession of Kamen Rider Saber, who used in alongside the Holy Saber Flame. After Kamen Rider Mistia stole it, it was in the possession of Tale Master. This sword was in Lance Blaze's possession after he thwarted Tale Master's plan. It would later be transferred back to Alistair.
Design[]
The Holy Saber Volt is composed of the following parts:
- Holy Saber Base: The base of the sword.
- Sacred Handle: The handle. It determines the person who is selected by the Holy Saber Volt.
- Action Trigger: The trigger. When triggered, the Holy Saber Volt reads its user's intentions and initializes Rider Finishers.
- Surging Thunder Emblem: The yellow hilt decorated with Volt's emblem. It is capable of generating holy lightning that can energize life and pierce any evil that lurks in darkness.
- Sacred Blade: The silver blade. It has been forged by holy lightning over several years, and the blade has the ability to become sharper as it receives lightning.
- Holy Channeler: The blade's clear yellow section. It is a blade that can carry wisdom. By pressing a Ride Book against the Sacreader, the Holy Saber Volt can embody and hold its contained lore for attacks.
- Sacreader: The reading device at the tip of the blade. By pressing it against the special speed-reading metal fitting Taleader located on the back cover of a Ride Book, the Holy Saber Volt can read the book's lore. As a result, it becomes possible to temporarily hold all the power of the Ride Book's lore in the Holy Saber for finishing attacks.
Functionality[]
Transformation[]
To transform, the user inserts one to three Ride Books into the corresponding slots on the belt and pulls out the sword.
Finisher[]
- Main article: Finisher (Saber)
There are five ways to activate a finisher with the Holy Saber Volt:
- Pull the trigger on the sword twice while it's docked into the belt.
- Pull the trigger on the sword and pull it out of the buckle.
- Remove one of the books, and scan it against the sword's tip while it's deployed. The scanning can be done up to three times.
- Dock the sword into one of the Sacred Holders before pulling the trigger on the sword, and pulling it back out.
- Scanning the Dragonic Buster or King Lion Buster on the sword's tip and pulling the trigger.
- Thunder Crash: Volt deliver multiple slashes at the enemy at high speed, before a thunder strike down at the enemy, destroying them.
Thunder Crash (Step 1: Superhuman speed)
Thunder Crash (Step 2: Lightning gathering)
Thunder Crash (Step 3: First slash)
Thunder Crash (Step 4: Second slash)
Thunder Crash (Step 5: Thunder strike down)
Thunder Crash (Step 6: Explosion)
- Thunder Needle Crash: Volt summons an apparition of the Genie Taleast, covered in quills before delivering the quills to enemy. Volt himself deliver a rising slash through the enemy before performing a downward vertical slash, coated by thunder to finish the enemy in question.
Thunder Needle Crash (Step 1: Charging)
Thunder Needle Crash (Step 2: Summoning Genie Taleast covered in quills)
Thunder Needle Crash (Step 3: Quills shooting)
Thunder Needle Crash (Step 4: Rising slash)
Thunder Needle Crash (Step 5: Downward vertical slash)
Thunder Needle Crash (Step 6: Thunder strike down)
Thunder Needle Crash (Step 7: Explosion)
- Maximum Voltage: Has three variations.
- Volt charges the Holy Saber Volt with lightning energy and delivers a thunder enhanced slash to the enemy.
- Volt disappears in a flash of light, dashing forward in a straight line at high speeds and destroying enemies in his path in the form of a long streak of lightning. Afterward, he swings the Holy Saber Volt, launching a barrage of energy hedgehog quills into enemies above.
- Volt charges the Holy Saber Volt with yellow lightning and runs at the enemy at high speeds before delivering a slash attack.
Maximum Voltage (Version 1) (Step 1: Charging)
Maximum Voltage (Version 1) (Step 2: Thunder-enhanced slash)
Maximum Voltage (Version 1) (Step 3: Impact)
Maximum Voltage (Version 2) (Step 1: Volt disappearing)
Maximum Voltage (Version 2) (Step 2: Attacking enemies)
Maximum Voltage (Version 2) (Step 3: Explosions)
Maximum Voltage (Version 2) (Step 4: Swings the Holy Saber Volt)
Maximum Voltage (Version 2) (Step 5: Energy hedgehog quills)
Maximum Voltage (Version 2) (Step 6: Piercing through enemies)
Maximum Voltage (Version 3) (Step 1: Charging)
Maximum Voltage (Version 3) (Step 2: Dashing towards the enemy)
Maximum Voltage (Version 3) (Step 3: Slash)
- Thunder Strike Type One: Volt scans a Ride Book against the tip of the blade, and performs an attack based off of it.
- Needle Hedgehog: The blade of the Holy Saber Volt manifests a mass yellow energy quills before Volt delivers a close range slash of lightning energy.
_Step_1.png "Hedgehog Shutoku Issen (Espada) Step 1.png (2.9 MB)")
Thunder Strike Type One (Needle Hedgehog) (Step 1: Charging)
_Step_2.png "Hedgehog Shutoku Issen (Espada) Step 2.png (3.21 MB)")
Thunder Strike Type One (Needle Hedgehog) (Step 2: Yellow energy quills)
_Step_3.png "Hedgehog Shutoku Issen (Espada) Step 3.png (3.41 MB)")
Thunder Strike Type One (Needle Hedgehog) (Step 3: Lightning energy slash)
Volt delivers a slash that summons the Cerberus Taleast. The projection then rams into the enemy.
Thunder Strike Type One (Tri Cerberus) (Step 1: Cerberus Taleast)
Thunder Strike Type One (Tri Cerberus) (Step 2: Ramming at enemy)
Thunder Strike Type One (Tri Cerberus) (Step 3: Impact)
- Alangina Voltage: Volt jumps into the air and performs a lightning-enhanced kick at high speed.
Alangina Voltage (Step 1: Jumping)
Alangina Voltage (Step 2: Channeling lightning energy)
Alangina Voltage (Step 3: Flying kick)
Alangina Voltage (Step 4: Breaking through the enemy)
Alangina Voltage (Step 5: Impact)
Alangina Voltage (Step 6: Explosion)
- Alangina Mystifier: Has two variations.
- By pressing on the Lamp Do Alangina Ride Book, Volt performs a Crescent Moon shaped slash of lightning energy.
- By pressing on the Lamp do Alangina Ride Book, Volt summons the Genie Taleast to assist him.
Alangina Mystifier (Version 1) (Step 1: Charging)
Alangina Mystifier (Version 1) (Step 2: Crescent Moon shaped slash)
Alangina Mystifier (Version 1) (Step 3: Enlarging slash energy)
Alangina Mystifier (Version 1) (Step 4: Impact)
Alangina Mystifier (Version 2) (Step 1: Genie Taleast)
Alangina Mystifier (Version 2) (Step 2: Grabbing enemy)
Alangina Mystifier (Version 2) (Step 3: Raising enemy)
Ride Books[]
- "Behold the legendary tale of the swordsman wielding the sword of thunder..."
- ―Story announcement[src]
Story of Holy Saber Volt Ride Book is based on the Holy Saber Volt.
Cover Page
.png "KRSa-Raimeiken Ikazuchi Wonder Ride Book (Transformation Page).png (211 KB)")
Transformation Page
Behind The Scenes[]
A shorter version of the Holy Saber Volt
A shorter prop version of Holy Saber Volt is used by actors when performing Volt's transformation sequence.
Portrayal[]
The Holy Saber Volt is voiced by Kevin Michael Richardson, who previously voiced Zephyr
in Power Rangers Dinoric Knights.
Notes[]
Surging Thunder Emblem
- Just like the Holy Saber Aqua, the DX Surging Thunder Emblem is sold as a standalone unit that attaches itself to the already existing sword base that comes with the DX Holy Sword Riser.
- However, Unlike the Rushing Water Emblem, The DX Surging Thunder Emblem will be sold as one set with DX Lamp Do Alangina Ride Book.
Appearances[]
.png){kind=link}
See also[]
- Raimeiken Ikazuchi - Counterpart in Kamen Rider Saber.